Electronic 
Moisture Meters 
for Concrete & Drywall

Tramex Concrete Encounter (CME 4)        

For measuring moisture content instantly in concrete floors and floor screeds without the need to drill or damage the surface.

The Concrete Moisture Encounter 4 will give you an instant reading of moisture content up to 6% concrete; up to 0 - 10 comparative on gypsum screed enabling you to make an informed decision on when to install the floor covering.

 To use, simply switch on and hold the instrument firmly against the surface. As many non-destructive tests as you need can be carried out in seconds without the need to drill or damage the concrete.

- Moisture detector for wood, felt-roofing, dry wall plaster and brick.

Detects moisture beneath the surface being tested by measuring the resistance between two low frequency signals transmitted from conductive pads on the base of the instrument.

Since the resistance is decreased six fold by the presence of the moisture a clear accurate signal is achieved. The soft conductive electrode pads on the base of the instrument run smoothly over the surface being tested and immediately identify moisture without scratching or drilling the surface.  

Simply select the appropriate scale, hold the Moisture Encounter to the surface and read directly from the meter.